Kolpak P6-054-FS/FT Walk-In Freezer 5' X 4'

Ver imagen más grande Añadir a Lista de Deseos Más Infomación

Descripción

Walk-In Freezer, Polar-Pak, 6'-6"H, 4'-10-1/2"W, 3'-11"L, w/floor, 1 hp. low temp (-0F) side mount or top mount unit, refrigeration must be on the 5' wall, 26 ga. embossed galvalume interior & exterior, .100 smooth alum. floor, 2-1/2" dial thermometer
No Refrigeration Service Technician Required.

Model

Kolpak P6-054-FS Walk-In Freezer, Polar-Pak, 6'-6"H, 4'-10-1/2"W, 3'-11"L, w/floor, 1 hp. low temp (-0F) side mounted unit, refrigeration must be on the 5' wall, 26 ga. embossed galvalume interior & exterior, .100 smooth alum. floor, 2-1/2" dial thermometer

Specifications

Cube: 80
Weight: 879
Height: 78
Width: 58.5
Depth: 47
Priced By: each

Installation

The industry's simplest installation. Polar-Pak can easily be installed in practically no time at all without the services of a refrigeration technician or plumber. Corners, wall panels and doors are quickly assembled on the unit's floor (or screeds), and the ceiling panels lifted into place. Then the self-contained wall-mount refrigeration unit, equipped with caster for leveling, is simply rolled up and fitted into place. The top mount system is shipped ready to fit into the appropriate ceiling panel, and is simply lifted into position and then bolted into place. Wiring the refrigeration system can be as simple as attaching a pigtail and plugging the unit into the wall. No drain line is required on indoor installations - making Polar-Pak ideal for basements and upper-floor applications. If you do not see a specific Kolpak product, please call 1-800-555-0666 and our customer service representatives will be able to assist you. Thank you.

Quality

Polar-Pak coolers and freezers are made with the same rugged, high performance construction that has make KOLPAK the leader in walk-in refrigeration. The Polar-Pak modular panels of 4" 100% foamed in place non-CFC urethane foam offer superior insulating capabilities. The exterior and interior of top-quality galvalume. The Polar-Pak also offers superior air circulation around the coils making it both economical and efficient to run.

Side mounted unit compressor comes on casters so there is no heavy lifting for our valued customers.

Self-evaporating compressor technology eliminates the need for a plumber or plumbing equipment.

Features

> Hot gas condensate evaporator
> Super door" construction to seal in cold, prevent condensation
> Posi-Loc panel fasteners for a perfect airtight fit
> Brushed chrome hinges and door handle with key lock
> Interior safety release to prevent accidental entrapment
> Coved corners on floor panels for easier cleaning, greater sanitation
> Heated air-vents on freezers to eliminate vacuum & pressure build-up
> Vapor-proof interior light with convenient switch

Flexibility

Polar-Pak is flexible enough to be used in virtually any configuration. There's no need for numbered panels. Side mount refrigeration systems can easily be set into any of the unit's 46" wide wall panel locations. Unit Coil is level with the ceiling, thus providing more storage area and preventing accidental damages to the fan.

Insulation

Polystyrene insulation is an inexpensive foam that has a low R-Factor (insulative rating). The polystyrene insulated unit will not hold temperature as affectively as the high quality foamed in place urethane used in Kolpak systems. In fact a Kolpak unit may operate as little as half the time and still maintain temperature. This translates into substantial electrical savings and reduced wear and tear on the refrigeration system. The pay back for the additional cost should be realized in as little as 6 months to a year.The Kolpak "foamed in place" construction process involves forming a high density urethane foam into a block of pre-constructed heavy gauge panels. Polystyrene insulated units are manufactured by simply laminating (gluing) the outer metal skin onto foam blocks which have been known to delaminate after time. Think twice before purchasing these units as they do not pay in the long run. Kolpak manufactures custom components for their refrigeration systems that are oversized and are more productive. These systems are tested to function in ambient temperatures as high as 120 degrees. Most other manufacturers test at 90 degrees. Additionally, more than any other component in your operation, refrigeration systems are highly sensitive and may require more service. It's comforting to know that Kolpak has authorized service agencies throughout the country and can respond speedily when required. The old axiom, "You get what you pay for" surely applies here.

Outdoor package contains the following:

- Outdoor package, for 1 hp low temp, w/low ambient controls, crankcase heater & outdoor housing
- Outdoor package for door
- Flat membrane roof cap

Shipping

FREIGHT CHARGES WILL BE APPLIED. If you need lift-gate delivery please specify.

Details

More

More